Designing and Making Paper Items

There are several ways of decorating paper. Most of the techniques were born out of experimentation of the artist with the colours and other materials found in the environment. This implies that aside from those methods that will be detailed, every artist must endeavour to create new ways of designing paper items.

1. Marbling (controlled and uncontrolled)

2. Comb-pattern

3. Wax resist

4. Doodling

5. Spraying

6. Roller and twine pattern

7. Ink-blowing

1. Marbling (controlled and uncontrolled)

Marbling is a method of making decorative patterns on paper by transferring colour from the surface of a liquid onto paper. Tools and materials required for marbling include paper, brushes, thinner, basin or trough, various colours of oil paint, cooked starch, empty tins, stick, and water.

Controlled Marbling

Process:

1. Fill a trough with cooked starch in an even consistency.

2. Sprinkle different colours of oil paint on the starch.

3. With the aid of the stick, stir gently for the colours to mix on the surface of the starch in order to make the patterns.

4. Place paper flat on top of the starch and tap the back to remove trapped air.

5. Hold one edge of the paper and remove it by dragging it along the edge of the trough to remove the starch.

6. Excess starch is washed off with water and hanged to dry.

Uncontrolled Marbling

Process:

1. Fill a trough with water.

2. Sprinkle different colours on the water.

3. Stir in different directions for the colours to come together over water.

4. Place paper flat on top of the trough and tap the back to remove trapped air.

5. Hold one edge of the paper and remove it by dragging it along the edge of the trough.

2. Comb-pattern

The tools and materials are large brush, paper or hair comb, cooked starch, water, powder colours, paper.

Process:

1. Mix powder colour with cooked starch to an even consistency to form a thin paste.

2. The brush is used to paint paste over the entire surface of paper.

3. The comb is used in making rhythmic patterns on the sheet.

4. It is hanged to dry.

3. Wax resist

Tools and materials required for this paper pattern making technique include brush, crayon or candle, powder colour, paper.

Process:

1. A sheet of paper is folded and creased to create parallel lines.

2. Wax is used to draw lines within the folded lines.

3. Go over the lines for a second run.

4. Colours are mixed and painted over the waxed paper.

Another technique is to sprinkle molten wax on paper. It is painted over with any high key colour. Wax is sprinkled over again and painted over with a low-key colour. After drying it, place the paper between two sheets of newspaper and iron to remove the wax leaving the patterned design.

4. Doodling

The tools and materials used include pencil, colours, paper, and brushes.

Process:

1. Create doodles to cover the entire sheet. Doodles are scribbles make on paper without any forethought plan.

2. Different colours are mixed to paint familiar shapes created by the doodles.

3. Erase the extensions created by the pencil.

5. Spraying

Tools and materials used include spray diffuser or shoe brush, paper, colour, cut out shapes, natural objects.

Process:

1. Arrange the natural objects or patterned templates and maintain their positions with drawing pins on the sheet of paper.

2. Spray colours on the patterns using the spray diffuser or an empty pen barrel with a mesh held at one end.

3. Gently remove the drawing pins and the cut out patterns.

4. The sprayed patterns on the paper is left to dry.

6. Roller and twine pattern

Tools and materials used include paper, printing ink, two hand rollers, rags, twine, thinner, glass slab.

Process:

1. Twine is wound around one hand roller.

2. Printing ink is placed on glass slab and rolled over with the second roller.

3. Printing ink is transferred onto the twined roller by rolling it over the glass slab.

4. The inked twined roller is rolled over the paper from the edge to edge and covered all over.

5. The rollers are cleaned with thinner and a different colour is used to go over the already created pattern to give a two coloured effect.

7. Ink-blowing

Tools and materials used include ink, paper, and empty pen barrel.

Process:

1. Sprinkle the paint at different sections on the paper.

2. Blow the paint to sprinkle it in a hairstyle manner using the empty pen barrel.

3. Leave the paper to dry.

Decorative papers are used for making book covers, endpaper, wrappers, wallpaper, background for calligraphy etc.

Music – An Important Source of Entertainment

Music has been one of the key features of the entertainment industry. People have become so addicted to music that they can’t imagine their lives without it. Listening to music reduces the stress level and helps to calm an individual. It also rejuvenates and soothes one’s mind. Truly, music refreshes an individual and acts as a stress buster for the people whose lives have become monotonous due to the hectic schedule.

These days, music systems come with a variety of features and enhancements and are well equipped with proper bass, vibe and treble. They have a better sonic resolution. One can arrange their music tracks in their order of preference while listening. One can also take it as a disc jockey when arranging for a party. The karaoke is another important feature introduced in these systems. This feature shows a listener, lyrics of the song being played which increases the interest of a listener even more. Moreover, a listener can sing the song along with the same beats and rhythm.

Music industry is aware of the demands of listeners and so keeps on updating the music systems with new software. Sonos is the foremost digital music system that enables an individual to play music in all the rooms of the house.

Internet is another medium that makes music accessible to the people around the world. No matter if it is an old song that one wants to hear or a latest track all can be downloaded from the Internet. Computers are equipped with memory, software, sound card, processors, record and play features that can play the same track infinitely. One such software is named file-sharing program. This enables the internet user to browse a site and download the music in a digital format. Moreover, all the songs can be downloaded free of cost with best quality voice.

DVD players are another source of music. These players make use of digital video discs to store data and movies. Though priced quite reasonably, they have features that are parallel to high-valued models. They are portable and also have a video screen. It can be used for listening all different types of music like jazz, rock, soft and many others.

Thus, music is an important source of entertainment and can be listened anywhere through various sources available. The means of music systems vary and are distinctive in range, whether it is music system, Internet music or DVD players.

Teardrop Piercing And How To Get One

Are you ready to get pierced again? Well, why not try the teardrop pierce? If you are feeling bold and you want something different when it comes to body piercing, you might want to try teardrop piercing. This piercing got its name because the pierced section is situated right atop the apples of your cheeks, just where teardrops usually fall. Those who get the teardrop pierce make use of the same earrings used for the belly or the brow.

Before getting this kind of piercing, here are some important things you need to take note of:

Visibility – Teardrop piercing is highly visible, unless you take off the earrings. It’s right on the ears and the hole stretches close to an inch so you can’t really use a regular earring to go through it.

Tolerance for pain – Most people say that this kind of piercing does not hurt. But in truth, it can. It actually depends on your own tolerance for pain and also the skin you have at that area. Remember that facial skin is softer and sometimes thinner than other parts of the body.

Sensitive skin – Teardrop piercing is done right on your skin. So make sure your face is not that sensitive because you will have to sanitize the piercing in two weeks time, very regularly. Make sure that you apply alcohol on the area without risking breakouts or facial allergies.

Aside from these things, you also need to take note of the person who will get the piercing done. Hygiene is very important. Make sure you are only getting pierced from a specialist who really uses clean tools. Here are some tips you can use to find the best piercing artist to do this work on you:

Ask recommendations from friends – Get in touch with your own network of friends. Ask them for their own recommendations. They might be able to give you the contact details of a good artist for the job.

Take a trip to the location – Before getting pierced, take time to actually go to the location and see how the artist will actually be doing the work on you. Does the place look clean? Do they use sanitized tools in there? Are you comfortable with the person who’s going to do the work on you? It’s also good to find a shop that’s actually near your home so that you won’t have to travel far with your fresh piercing on.

Talk with your artist – Tell your artist what you like and if you have pain issues, be upfront about it. Ask questions about teardrop piercing especially about cleaning it. They will be the best people to ask about it anyway. You can also ask if they could be the ones to provide the earring because some shops might only be willing to do the labor but will rely on your for the earrings.

How to Write a Motion Graphics Design Or Animation Treatment

Give Yourself the best chance of winning the Design or Animation project with these guidelines

The Title & Introduction

The very first thing you will write on any treatment is the name of the project, so it is highly advisable to make sure you get this part correct. When taking a brief it is always a good idea to take as detailed notes as possible about all aspects of the project including the people involved, key words, reference material, technical aspects or limitations, audio preferences and project working titles. These notes will assist when putting the basics into a treatment, and showing your fullest understanding of the brief, like the correct title, or key words that the client was at pains to describe the project with.

Once you have a clean leading page with the clients name, the name of the project, and any subtitle, you are ready to add the first and most important body of text, the introduction or approach.

The introduction, outline, premise or approach to a treatment is a vital and concise 2 or 3 line paragraph, clearly telling the reader what it is they are about to read, and the reason for reading it. Ideally this paragraph will ‘grab’ the reader immediately and tweak their interest, wanting to read the rest of the document.

The Writing Style

The use of descriptive language is an important part of the art of all writing, no less with treatments, where you ideally need to squeeze all the information into one or two sides of a4 paper to paint a clear picture in the readers mind’s eye of exactly what they can expect the final film or animation to look like.

When describing your concept, try and use flowing and elegant phrasing while being descriptive and to the point. A wide use of vocabulary will keep the reader interested and their brain visualising the result.

For example, The brief is for a television crime drama title sequence, and the Director wants the style of the title sequence to reflect the period, atmosphere and subject matter of the script. The Director may use quite descriptive words in a brief like, dark or chilling, ensure to re-use these words in your treatment and add some of your own to further embellish. For example; dark foreboding blackness, or chilling, spine jarring finale.

Try not to repeat the same word too many times, and think of alternative ways to describe the same or similar part of the project. For example; when mentioning a transitional effect in the animation or film, try and find new ways to write about that effect.

Your Branding

Ensure that your business, company or studio logo and branding is clearly marked on the front of the treatment, as well as the body of the treatment to ensure that all who read it will know where it is from and who wrote it. It will also help ensure your ideas stay as your own and are not borrowed by someone else. Another consideration is to flatten your document to ensure that the logo and graphics are displayed correctly and no one is able to edit your treatment or take paragraphs for re purposing into another document. Saving your MS Word or other word processor document as an Adobe Acrobat PDF file is an ideal way of achieving this.

The Concept

This is the main body of text where you can flesh out the idea in more detail. It is important to ensure that this paragraph is easy to read and to the point. Use this part of the treatment as a way of quickly describing the rest of the information that you eloquently touched on in your Introduction. Try and keep the sentences brief with enough space around them to be absorbed easily. Allow the sentences to flow together easily to ensure the reader does not get lost partway through, it is vital that your idea makes sense from start to finish giving your reader the chance of constructing the piece in their own minds eye.

Imagery

Consider including images to assist your concept.

You will probably be producing a storyboard separately to your treatment, but using additional reference images, character illustrations, environment and backgrounds or mood board images in your treatment can really help the reader to grasp what you are saying. Positioning the images is also important, breaking up the paragraphs can lose the readers flow, so try adding an image or series of images under a paragraph.

Using a large image under the Introduction can act as a real eye grabber for the rest of the document.

Reference Material

Reference material is key to helping sell your idea, especially if you can reference your own past work. It is another chance to showcase your work and give the client every confidence in your ability to deliver what you are writing about. References can be web links, embedded links, images, sounds, music tracks, illustration or video. If possible, try and collate it all into one place, an ftp location, a website, a file share location or as zipped attachments to make it easy for the client to explore your references and not have to go to many different internet sites. Again, keeping the treatment easy to read, follow and absorb is paramount.

The Technical Breakdown

The technical section of a treatment should be very factual, very brief and very clear. The clarity will, once again, illustrate to the reader that you have carefully thought the process through and understand exactly what it will take to achieve the finished result. You will always be able to change your thinking with kit later, but at least at this early stage you have approached the idea with a way of technically creating your masterpiece. This paragraph will also illustrate your ability to handle both aspects of any motion graphics project, creativity and technical knowhow, the core components to any motion graphics designer.

Think about outlining what and how many computers you will need, how much disk storage space and backup will be required, which software packages will you be using and are there any specific plug-ins or presets that are relevant. Also take into account the amount of rendering time and hardware that will be needed, archiving considerations, and final delivery formats and other delivery aspects.

Music and Audio

As we all know, music and sound effects can really bring animation and video to life and is a major part of any visual experience. Touch on ideas you have for the music and sound design, include references to other similarly styled videos and describe the tone and atmosphere that the music will evoke with your visuals.

The Budget & Estimated Costs

Costs and quotes are also a huge factor in whether you will succeed in getting the project you desire, but refrain from including any mention of money in the treatment. Instead provide a separate quotation document including any reference to technical or creative specifics in the treatment.

The Conclusion / Summary

The final part of your treatment should act in a similar way to the introduction.

It is a short paragraph that allows you to quickly remind the reader of the key points you discussed in the rest of the document. It is also a chance to use good language to leave the reader wanting to see what you have described, wanting to explore further, wanting to make it come to life.

List of Components

INTRODUCTION – short and sweet

CONCEPT – main descriptive body of text

IMAGES – reference material

TECHNICAL – geeky but essential breakdown

AUDIO – style and reference guide

SUMMARY – the final roundup