Designing and Making Paper Items

There are several ways of decorating paper. Most of the techniques were born out of experimentation of the artist with the colours and other materials found in the environment. This implies that aside from those methods that will be detailed, every artist must endeavour to create new ways of designing paper items.

1. Marbling (controlled and uncontrolled)

2. Comb-pattern

3. Wax resist

4. Doodling

5. Spraying

6. Roller and twine pattern

7. Ink-blowing

1. Marbling (controlled and uncontrolled)

Marbling is a method of making decorative patterns on paper by transferring colour from the surface of a liquid onto paper. Tools and materials required for marbling include paper, brushes, thinner, basin or trough, various colours of oil paint, cooked starch, empty tins, stick, and water.

Controlled Marbling

Process:

1. Fill a trough with cooked starch in an even consistency.

2. Sprinkle different colours of oil paint on the starch.

3. With the aid of the stick, stir gently for the colours to mix on the surface of the starch in order to make the patterns.

4. Place paper flat on top of the starch and tap the back to remove trapped air.

5. Hold one edge of the paper and remove it by dragging it along the edge of the trough to remove the starch.

6. Excess starch is washed off with water and hanged to dry.

Uncontrolled Marbling

Process:

1. Fill a trough with water.

2. Sprinkle different colours on the water.

3. Stir in different directions for the colours to come together over water.

4. Place paper flat on top of the trough and tap the back to remove trapped air.

5. Hold one edge of the paper and remove it by dragging it along the edge of the trough.

2. Comb-pattern

The tools and materials are large brush, paper or hair comb, cooked starch, water, powder colours, paper.

Process:

1. Mix powder colour with cooked starch to an even consistency to form a thin paste.

2. The brush is used to paint paste over the entire surface of paper.

3. The comb is used in making rhythmic patterns on the sheet.

4. It is hanged to dry.

3. Wax resist

Tools and materials required for this paper pattern making technique include brush, crayon or candle, powder colour, paper.

Process:

1. A sheet of paper is folded and creased to create parallel lines.

2. Wax is used to draw lines within the folded lines.

3. Go over the lines for a second run.

4. Colours are mixed and painted over the waxed paper.

Another technique is to sprinkle molten wax on paper. It is painted over with any high key colour. Wax is sprinkled over again and painted over with a low-key colour. After drying it, place the paper between two sheets of newspaper and iron to remove the wax leaving the patterned design.

4. Doodling

The tools and materials used include pencil, colours, paper, and brushes.

Process:

1. Create doodles to cover the entire sheet. Doodles are scribbles make on paper without any forethought plan.

2. Different colours are mixed to paint familiar shapes created by the doodles.

3. Erase the extensions created by the pencil.

5. Spraying

Tools and materials used include spray diffuser or shoe brush, paper, colour, cut out shapes, natural objects.

Process:

1. Arrange the natural objects or patterned templates and maintain their positions with drawing pins on the sheet of paper.

2. Spray colours on the patterns using the spray diffuser or an empty pen barrel with a mesh held at one end.

3. Gently remove the drawing pins and the cut out patterns.

4. The sprayed patterns on the paper is left to dry.

6. Roller and twine pattern

Tools and materials used include paper, printing ink, two hand rollers, rags, twine, thinner, glass slab.

Process:

1. Twine is wound around one hand roller.

2. Printing ink is placed on glass slab and rolled over with the second roller.

3. Printing ink is transferred onto the twined roller by rolling it over the glass slab.

4. The inked twined roller is rolled over the paper from the edge to edge and covered all over.

5. The rollers are cleaned with thinner and a different colour is used to go over the already created pattern to give a two coloured effect.

7. Ink-blowing

Tools and materials used include ink, paper, and empty pen barrel.

Process:

1. Sprinkle the paint at different sections on the paper.

2. Blow the paint to sprinkle it in a hairstyle manner using the empty pen barrel.

3. Leave the paper to dry.

Decorative papers are used for making book covers, endpaper, wrappers, wallpaper, background for calligraphy etc.